AN200 RFID ANTENNA
Zebra general purpose AN200 RFID antenna can be used reliably in a wide range of indoor and outdoor environments, from the warehouse to the production line to the docking zone.
  • The general purpose AN200 RFID antenna can be used reliably in a wide range of indoor and outdoor environments, from the warehouse to the production line to the docking zone.

    Its rugged design withstands a range of environmental conditions from extreme heat and cold to moisture and vibration, making this antenna ideal for nearly any application. The AN200 Antenna can be used in standard RFID applications at power levels of up to 1 watt and in customized applications at power levels up to 20 watts.

  •  The AN200 will perform reasonably well in EU frequency in most applications.

    See footnotes for additional information 1

    Performance Characteristics

    Nominal impedance
    50 Ohm

    Power
    20 watts (max. input)

    Front to back ratio
    <10 db

    Frequency range2 
    902-928 MHz

    Gain
    6.0 dBi linear

    Axial ratio
    <3 dB

    Voltage Standing Wave Ratio (VSWR)
    20 dB (1.22)

    Physical Characteristics

    Connector
    Type "N" Female

    Polarization
    LHCP or RHCP

    Single port
    Yes

    Dimensions (with mounting screws)
    11.1 x 11.1 x 1.9 in. (28.19 28.19 x 4.83 cm) H x W x D

    Weight
    3 lbs (1.26 kg)

    Connector position
    Rear

    User Environment

    Temperature shock test
    IEC-68-2-14 (-40° rising to 158° F/-40° rising to 70° C)

    Humidity test
    IEC-68-2-30 (77° to 104° F/-25° to 40°

    Random vibration test
    IEC-68-2-6 (10 to 150 Hz, 05 g, 1 hour in each of 2 axes)

    Environmental sealing
    IP54

    Heat test
    IEC-68-2-2 (158° F/70° C for 24 hours)

    Salt fog test
    IEC-68-2-11 (96 hours, repetitive cycling)

    Outdoor use
    Yes

    Operating temperature
    -40° to +149° F (-40° to +65° C)

    Cold test
    IEC-68-2-1 (-40° F/-40° C for 24 hours)

    Rain test
    IEC-68-2-18 (8 hours minimum in rain chamber at 43 psi)

    Temperature shock test
    IEC-68-2-14 (-40° F rising to 158° F (-40° C rising to 70° C) in 10 cycles of 60 minutes each)

    Humidity test
    IEC-68-2-30 (77° to 104° F (-25° to 40° C)), 24 hour cycles of 90% relative humidity

    Impedance
    DC: 10 kOhm +/- 5%

  • Healthcare icon AN200 RFID ANTENNA can be used in Health care Industry
    Retails icon AN200 RFID ANTENNA can be used on Retail Stores
    Logistics icon AN200 RFID ANTENNA Mostly used in Logistics Industry for Asset Managemnet and Tracking
    Manufacturing icon Manufacturing Industry uses AN200 RFID ANTENNA
    Government icon AN200 RFID ANTENNA used in various Government Sectors
    Travel & Leisure icon AN200 RFID ANTENNA for Travel & Leisure
    Special Materials icon AN200 RFID ANTENNA for Special Materials







Select Product Line