The MK2500 prints precise characters of up to 300dpi for tubes, labels and more. With a large LCD display and automatic full and half-cutting, it offers smooth and easy printing from start to finish.
- Character sizes: 2, 3, 6mm
- Print speed (tubes): up to 240cm per minute
- Standard output rate 42pcs./min.*
*20mm tube, 5 full-size characters, consecutive print mode, fast cutting
Printing up to trailing edge of tube
The MK series printers can print characters up to the edge of each tube to avoid tube waste. This contributes to long-term cost reduction.
Automatic cutting / full-cut is also possible
Each segment is partially cut automatically as it prints. The segments are easily separated manually after they come out of the printer. The cutting operation for each job can be set for full-cut, half-cut, no cut with marking, or no cut without marking.
Consecutive / serial printing
MK series printers can be set to print the same text on every segment (consecutive printing). Just enter the data and the number of segments required, then start the print. Or, MK series printer can be set to print numbers that increment automatically as the segments print (serial printing). No need to do separate entries and printing for each segment!
Printing Method Thermal transfer Resolution 300dpi Printing Speed Tubes: High speed: 40mm/sec.
Middle speed: 25mm/sec.
Low speed: 18.5mm/sec.
Labels: High speed: 40mm/secs.
Middle / Low speed: 25mm/secs.
Output Rate High speed: About 42pcs./min. Middle speed: About 35pcs./min. Low speed: About 30pcs./min. Printing 20mm tubes, 5 full-size characters, consecutive print mode, half-cutting. Ink Ribbons (Exclusive cassette) Black: 100m White: 85m Black for Marking Strip: 40m Character Sizes 1.3mm (only full-width available), 2mm, 3mm, 6mm (full-width, half-width available for each) Input Modes Alphanumeric, symbol input Display LCD Graphic (160 x 64 dots) Display Capacity 10 characters/line x 2 lines (full-width) or
20 characters/line x 2 lines (half-width) (3 lines editing is possible.)
Built-in Memory Print-data: Approx. 2,500 characters Files: Approx. 15,000 characters Service life of internal backup battery for data storage: About 5 years Media Cutting Method Automatic full-cutting, Automatic half-cutting Power Supply Exclusive AC Adapter Input voltage: AC 100V - 240V 50 / 60Hz PC Interface USB2.0 Full-Speed, Exclusive PC Connection Kit (Included) Operating Environment 15°C - 32.5°C (59°F - 90.5°F),
10% - 85% RH
Range is lowered to 5°C (41°F) with Tube Warmer option installed
Storage Environment 5°C - 35°C (41°F - 95°F),
10% - 90% RH
Dimensions (W x D x H) 250 x 300 x 85mm (9.8 x 11.8 x 3.4in.) Weight 2kg (4.4lb.) (printer only) Tube PVC tube, φ 2.5 - 6.5mm, 0.5mm thick
Tube attachment option is required (Other tubes should be tested for printing.)
Label Tape (Exclusive cassettes (White, Yellow, Silver)) Width: 6mm, 9mm, 12mm Length: 30m (Silver: 27m)
Segment length can be set to 2mm through 150mm
Wrap Around Tape: Exclusive cassettes Print area only: White Other areas: Transparent Take-up length: 8m Length: 33mm Width: 6 - 150mm (depends on cut setting) Marking Strip Specified thickness 0.5mm Plates of other thickness should be tested for printing Width: 8mm, 8.5mm, 9mm, 9.5mm, 10mm Plate Attachment option is required Exclusive ribbon cassette is required Manual cut only Heat Shrink Tube Shrink tube: φ 3.0 - 6.4mm
Tube attachment option is required.
(Other tubes should be tested for printing.)
4mm ID Strip (Exclusive Cassette (White, Yellow)) Width: 4mm Length: 5m
Segment length can be set to 8mm through 150mm
Canon MK2500 Ferrule Printer can be used in Health care Industry Canon MK2500 Ferrule Printer can be used on Retail Stores Canon MK2500 Ferrule Printer Mostly used in Logistics Industry for Asset Managemnet and Tracking Manufacturing Industry uses Canon MK2500 Ferrule Printer Canon MK2500 Ferrule Printer used in various Government Sectors Canon MK2500 Ferrule Printer for Travel & Leisure Canon MK2500 Ferrule Printer for Special Materials